Horsch Startseite

Vehicles

Cars & Pickups

Red Vehicles

Size:

  1. Grey band on the side: the vertical heights starts with the radius of the car's wheel
  2. Door logo: the vertical height of the logo is one-fifth the height of the car door (between the grey strip and the window)
  3. The “H”: the horizontal width is 2x the radius of the car’s wheel
    Grey band on the rear: the width measurement is the radius of the car's wheel
  4. Rear logo: the horizontal width is 1/2 the width of the door logo

Location:

  1. Angles: the upper edge of the grey band, the logo and the “H” must follow the angle of the car side stripes design (the grey band goes up).
  2. Door logo: horizontally and vertically aligned in middle of the door (above the grey band).
  3. The “H”: horizontally aligned one "H element" (rear logo) of distance from the right edge of the door, the center aligned vertically with the edge of the grey band.
  4. Rear logo: horizontally aligned one "H element" of distance from the right edge of the trunk, measure half of the "H element" away from the grey band.

White and Silver Vehicles

Size:

  1. Red band on the sides: the vertical height starts with the radius of the the car's wheel
  2. Door logo: the vertical height of the logo is one-fifth the height of the car door (between the red strip and the window)
  3. The “H”: the horizontal width is 2x the radius of the car’s wheel
  4. Red band on the rear: the width measurement is the radius of the car's wheel
  5. Rear logo: the horizontal width is 1/2 the width of the door logo

Location:

  1. Angles: the upper edge of the red band, the logo and the “H” must follow the angle of the car side stripes design (the red band goes up).
  2. Door logo: horizontally and vertically aligned in middle of the door (above the red band).
  3. The “H”: horizontally aligned one "H element" (rear logo) of distance from the right edge of the door, the center aligned vertically with the edge of the red band.
  4. Rear logo: horizontally aligned one "H element" of distance from the right edge of the trunk, measure half of the "H element" away from the red band.

Transport Vehicles

Red Vehicles

Size:

  1. Grey band on the sides: the vertical height starts with the radius of the the car's wheel
  2. Door logo: the vertical height of the logo is one-sixth the height of the car door (between the grey strip and the window)
  3. The “H”: the horizontal width is 2x the radius of the car’s wheel
  4. Grey band on the rear: the width measurement is the radius of the car's wheel
  5. Rear logo: the horizontal width is 1/2 the width of the door logo

Location:

  1. Angles: the upper edge of the grey band, the logo and the “H” must follow the angle of the car side stripes design (the grey band goes up).
  2. Door logo: horizontally and vertically aligned in middle of the door (above the grey band).
  3. The “H”: horizontally aligned one "H element" (rear logo) of distance from the right edge of the door, the center aligned vertically with the edge of the grey band.
  4. Rear logo: horizontally aligned one "H element" of distance from the right edge of the trunk, measure one "H element" away from the grey band.

White and Silver Vehicles

Size:

Red band on the sides: the vertical height starts with the radius of the the car's wheel
Door logo: the vertical height of the logo is one-sixth the height of the car door (between the red strip and the window)
The “H”: the horizontal width is 2x the radius of the car’s wheel
Red band on the rear: the width measurement is the radius of the car's wheel
Rear logo: the horizontal width is 1/2 the width of the door logo

Location:

Angles: the upper edge of the red band, the logo and the “H” must follow the angle of the car side stripes design (the red band goes up).
Door logo: horizontally and vertically aligned in middle of the door (above the red band).
The “H”: horizontally aligned one "H element" (rear logo) of distance from the right edge of the door, the center aligned vertically with the edge of the red band.
Rear logo: horizontally aligned one "H element" of distance from the right edge of the trunk, measure one "H element" away from the red band.

All vehicles where due to their design the branding cannot be attached as shown above

The lateral logo is attached in the centre in the rear third of the vehicle.
Depending on the size of the vehicle, you can choose the following logo sizes: 800 x 186 mm or 400 x 93 mm.
The rear side is excluded from this rule. For the decals of the rear side see above.
Please always contact us in case of design-related special cases.